View FG0700G3DSSWBG01_7699544.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

confidential document FG0700G3DSSWBG01 rev: c page: 1 /19 data image corporation tft module specification item no.: FG0700G3DSSWBG01 table of contents 1. cover & contents ??????????????????????????????????????????????? 1 2. record of revision ????????????????????????????????????????????? 2 3. application ??????????????????????????????????????????????????????????? 3 4. general specifications ??????????????????????????????????????? 3 5. absolute maximum ratings ??????????????????????????????? 3 6. electrical characteristics ?????????????????????????????? 3 7. interface specifications ???????????????????????????????????? 5 8. optical characteristic ?????????????????????????????????????? 9 9. pin connections ???????????????????????????????????????????????????? 12 10. block diagram ????????????????????????????????????????????????????? 14 11. quality assurance ?????????????????????????????????????????????? 15 12. lot numbering system ???????????????????????????????????????? 16 13. lcm numbering system ???????????????????????????????????????? 16 14. precautions in use lcm ??????????????????????????????????????? 17 15. outline drawing ??????????????????????????????????????????????????? 18 16. package information ??????????????????????????????????????????? 19 customer companies r&d dept. q.c. dept. eng. dept. prod. dept. approved by version: issued date: sheet code: total pages: c 2009/6/11 19 hy-line computer components / www.hy-line.de/computer
confidential document FG0700G3DSSWBG01 rev: c page: 2 /19 2. record of revision rev date item page comment 1 22/apr/08 initial preliminary 2 15/may/08 10 14 modify block diagram. 3 5/jun/08 3,6,8, 15 3,4,9, 18 1. modify dot pitch from 0.1905 (h) x 0.1905 (v) to 0.0635 (h) x 0.1905 (v). 2. modify ?led life time? to ?led dice life time?, value and note 3. modify response time value, rise 15(typ)30(max), fall 20 (typ) 40(max) to rise 5(typ)10(max) fall 15(typ)20(max) 4. modify temperature cycle test value, from -20 +25

+70 ,
100 cycles to -30 +25 +80 ,

100 cycles 5. change outline drawing from rev:1 to rev:2 a 11/sep/08 4,6.2,8, 15 3,4,9,18 1. modify led current(1+2+3???..+9) to led current 2. modify vled 1,2,3,4,5,6,7,8,9=9.3v(min) to vled 1,2,3,4,5. 6,7,8, 9=8.4v(min) 3. add chromaticity values 4. add weight 132g 5. change outline drawing from rev:2 to rev: a to rev: b. 6. add package information. b 16/feb/09 7,19 5,20 modify ths from sthd[7:0]+88 to 216 modify tvs from stvd[6:0]+8 to 35 modify package information c 11/jun/09 6 4 modify led dice life time data. hy-line computer components / www.hy-line.de/computer
confidential document FG0700G3DSSWBG01 rev: c page: 3 /19 3. application dvd player, car tv, umpc, pos 4. general specifications parameter specifications unit screen size 7 (diagonal) inch display format 800(h) x (r,g,b) x 480(v) dot active area 152.4(h) x 91.44(v) mm dot pitch 0.0635 (h) x 0.1905 (v) mm pixel configuration stripe outline dimension 165(w) x 106.4(h) x 3.4 (d) mm surface treatment anti-glare and hard coating (3h) back-light led display mode normally white weight 132 g view angle direction 6 o?clock 5. absolute maximum ratings gnd=0v parameter symbol min. max. unit remark power supply voltage vcc -0.3 7 v logic input voltage vi -0.3 v cc +0.3 v ta=25 c operating temperature top -20 70 c module surface* storage temperature tst -30 +80 c - operation 20%~90% relative humidity ta<=38 c humidity non operation 5%~90% relative humidity ta<=38 c 6. electrical characteristics 6.1 operating conditions gnd=0v, fh=31.5khz, fv=60hz, fclk=33.26mhz,ta=25 c parameter symbol min. typ. max. unit remark power supply voltage v cc 3.0 3.3 3.6 v power supply current i cc 150 200 ma v cc =3.3v ripple voltage v rf - - 100 mv p-p ?h? level logical input voltage v ih 0.7vcc -- vcc v ?l? level logical input voltage v il 0 -- 0.3vcc v hy-line computer components / www.hy-line.de/computer
confidential document FG0700G3DSSWBG01 rev: c page: 4 /19 6.2 backlight driving consumption ta= 25 c parameter symbol min. typ. max. unit remark vled voltage v l 8.4 -- 10.8 v note1 led current i l - 180 - ma led dice life time 20,000 30,000 hr note2 note1: there are 9 groups (1 group of three leds). vled 1,2,3,4,5,6,7,8,9,=8.4v(min) note2: the ?led dice life time? is defined as the br ightness decrease to 50% original brightness that the ambient temperature is 18
~28
and led dice current=20ma. hy-line computer components / www.hy-line.de/computer
confidential document FG0700G3DSSWBG01 rev: c page: 5 /19 7. input signal characteristics 7.1 ac characteristics 7.1.1 ac electrical characteristics item symbol min. typ. max. unit hs setup time t hst 6 - - ns hs hold time t hhd 6 - - ns vs setup time t vst 6 - - ns vs hold time t vhd 6 - - ns data setup time t dsu 6 - - ns data hold time t dhd 6 - - ns de setup time t esu 6 - - ns 7.1.2 resolution j 800x480 z sync mode item symbol min. typ. max. unit clk frequency f cph - 33.26 - mhz clk period t cph - 30.06 - ns clk pulse duty t cwh 40 50 60 % hs period t h - 1056 - t cph hs pulse width t wh 1 128 - t cph hs-first horizontal data time t hs - 216 - t cph hs active time t ha - 800 - t cph vs period t v - 525 - t h vs pulse width t wv 1 2 - t h vs-de time t vs - 35 - t h vs active time t va - 480 - t h z de mode item symbol min. typ. max. unit clk frequency f cph - 33.26 - mhz clk period t cph - 30.06 - ns clk pulse duty t cwh 40 50 60 % de period t deh +t del 1000 1056 1200 t cph de pulse width t dh - 800 - t cph de frame blanking t hs 10 45 110 t deh +t del de frame width t ep - 480 - t deh +t del item symbol min. typ. max. unit oev pulse width t oev - 150 - t cph ckv pulse width t ckv - 133 - t cph de(internal)-stv time t 1 - 4 - t cph de(internal)-ckv time t 2 - 40 - t cph de(internal)-oev time t 3 - 23 - t cph de(internal)-pol time t 4 - 157 - t cph stv pulse width - - 1 - t h hy-line computer components / www.hy-line.de/computer
confidential document FG0700G3DSSWBG01 rev: c page: 6 /19 7.2 timing controller timing chart 7.2.1 clock and data input waveforms figure 1 clock and data input waveforms. 7.2.2 data input format figure 2 sync mode horizontal data format hy-line computer components / www.hy-line.de/computer
confidential document FG0700G3DSSWBG01 rev: c page: 7 /19 figure 3 sync mode vertical data format 7.2.3 de mode data format n=800 figure 4 de mode data format hy-line computer components / www.hy-line.de/computer
confidential document FG0700G3DSSWBG01 rev: c page: 8 /19 7.3 color data input assignment hy-line computer components / www.hy-line.de/computer
confidential document FG0700G3DSSWBG01 rev: c page: 9 /19 8. optical characteristic parameter symbol condition min. typ. max. unit remarks x + 60 70 -- horizontal x - 60 70 -- vertical y + 40 50 -- viewing angle y - center cr 10 50 60 -- deg note 1,4 contrast ratio cr at optimized viewing angle 300 400 -- note 1,3 rise tr - 5 10 ms response time fall tf center x= y =0 - 15 20 ms note 1,6 uniformity b-uni x= y =0 70 80 -- % note1,5 brightness l x= y =0 270 350 -- cd/ note 1,2 x w 0.252 0.302 0.352 y w 0.289 0.339 0.389 x r 0.525 0.575 0.625 y r 0.310 0.360 0.410 x g 0.281 0.331 0.381 y g 0.521 0.571 0.621 x b 0.099 0.149 0.199 chromaticity y b center x= y =0 0.088 0.138 0.188 note 1,7 image sticking tis 2 hours 2 sec note 8 the following optical specifications shall be measured in a darkroom or equivalent state (ambient luminance 1 lux, and at room temperature). the operation temperature is 25 c 2 c and led backlight current il=180ma. the measurement method is shown in note1. note1: the method of optical measurement: hy-line computer components / www.hy-line.de/computer
confidential document FG0700G3DSSWBG01 rev: c page: 10 /19 note2: measured at the center area of the panel and at the viewing angle of the x= y =0 note3: definition of contrast ratio (cr): luminance with all pixels in white state cr = luminance with all pixels in black state note4: definition of viewing angle note 5: definition of brightness uniformity (b-uni): 123 456 789 minimum luminance of 9 points b-uni ? maximum luminance of 9points (note 5). hy-line computer components / www.hy-line.de/computer
confidential document FG0700G3DSSWBG01 rev: c page: 11 /19 note6: definition of response time: the response time is set initially by defining the ?rising time (tr)? and the ?falling time (tf)? respectively. tr and tf are defined as following figure. note 7: definition of chromaticity: the color coordinates (x w ,y w ),(x r ,y r ),(x g ,y g ),and (x b ,y b ) are obtained with all pixels in the viewing field at white, red, green, and blue states, respectively. note 8: definition of image sticking (tis): continuously display the test pattern shown in the figure below for 2 hours. then display a completely white screen. the previous image shall not persist more than 2 sec at 25 c image sticking pattern white area black area hy-line computer components / www.hy-line.de/computer
confidential document FG0700G3DSSWBG01 rev: c page: 12 /19 9. pin connections pin no. symbol description 1 gnd power ground 2 gnd power ground 3 vcc power supply for digital circuit 4 vcc power supply for digital circuit 5 r0 red data 0 (lsb) 6 r1 red data 1 7 r2 red data 2 8 r3 red data 3 9 r4 red data 4 10 r5 red data 5 11 r6 red data 6 12 r7 red data 7 (msb) 13 g0 green data 0 (lsb) 14 g1 green data 1 15 g2 green data 2 16 g3 green data 3 17 g4 green data 4 18 g5 green data 5 19 g6 green data 6 20 g7 green data 7 (msb) 21 b0 blue data 0 (lsb) 22 b1 blue data 1 23 b2 blue data 2 24 b3 blue data 3 25 b4 blue data 4 26 b5 blue data 5 27 b6 blue data 6 28 b7 blue data 7 (msb) 29 gnd power ground 30 clk clock signals ; latch data at the falling edge 31 nc no connection 32 hs horizontal synchronous signal 33 vs vertical synchronous signal 34 de data enable signal 35 nc no connection 36 nc no connection 37 gnd power ground 38 gnd power ground 39 nc no connection 40 nc no connection hy-line computer components / www.hy-line.de/computer
confidential document FG0700G3DSSWBG01 rev: c page: 13 /19 remarks : power signal sequence : t1 10ms ; 1 sec t5 50ms t2 ; 0 < t3 50ms ; 0 < t4 10ms vcc -dip condition : (1) 2.7v vcc 3.0v: td 10 ms (2) vcc > 3.0v vcc -dip condition should be the same with vcc,-turn-on condition. vcc hy-line computer components / www.hy-line.de/computer
confidential document FG0700G3DSSWBG01 rev: c page: 14 /19 10. block diagram tft-lcd panel (800xr,g,bx480) data driver ic with tcon scan driver ic tft display leda ledk back light unit 40pin input fpc dc/dc converter hy-line computer components / www.hy-line.de/computer
confidential document FG0700G3DSSWBG01 rev: c page: 15 /19 11. quality assurance 11.1 test condition 11.1.1 temperature and humidity(ambient temperature) temperature : 25 5 c humidity : 65 5% 11.1.2 operation unless specified otherwise, test will be conducted under function state. 11.1.3 container unless specified otherwise, vibration test will be conducted to the product itself without putting it in a container. 11.1.4 test frequency in case of related to deterioration such as shock test. it will be conducted only once. 11.1.5 test method reliability test item & level no. test item test level 1 high temperature storage test t=80 ,240hrs
2 low temperature storage test t=-30 ,240hrs
3 high temperature operation test t=70 ,240hrs
4 low temperature operation test t=-20 ,240hrs
5 high temperature and high humidity (no operation) t=60
,90%rh,240hrs 6 thermal cycling test (no operation) -30 : +25 : +80 ,

100 cycles 30 min 5 min 30 min 7 vibration test (no operation) frequency :10 ~ 55 h z amplitude :1.5 mm sweep time : 11 mins test period: 6 cycles for each direction of x, y, z 8 shock test (no operation) 100g, 6ms direction: x, y, z cycle: 3 times 11.2 judgment standard the judgment of the above test should be made as follow: pass: normal display image with no obvious non-uniformity and no line defect. partial transformation of the module parts should be ignored. fail: no display image, obvious non-uniformity, or line defect. hy-line computer components / www.hy-line.de/computer
confidential document FG0700G3DSSWBG01 rev: c page: 16 /19 12. lot numbering system 9 7 4 2 production week number production year 13. lcm numbering system fg 0700g3 d s s w b g 01 version :01 for rohs view direction & temp. range a y bottom view 6h & normal temp. b y bottom view 6h & wide temp. c?top view & normal temp d?top view & wide temp. backlight color w ?white y ? yellow green g - green backlight s?led b/l lcd polarize type n?negative s ? super wide view m?transmissive f? transflective lcd type a ?tft analog d ?tft digital series code 0700g3 ?, 7.0 inch model type fg?standard tft module fx?custom tft module hy-line computer components / www.hy-line.de/computer
confidential document FG0700G3DSSWBG01 rev: c page: 17 /19 14. precaution in use lcm 1. liquid crystal display (lcd) lcd is made up of glass, organic sealant, organic fluid, and polymer based polarizers. the following precautions should be taken when handing, (1). keep the temperature within range of use and storage. excessive temperature and humidity could cause polarization degradation, polarizer peel off or bubble. (2). do not contact the exposed polarizers with anything harder than an hb pencil lead. to clean dust off the display surface, wipe gently with cotton, chamois or other soft material soaked in petroleum benzin. (3). wipe off saliva or water drops immediately. contact with water over a long period of time may cause polarizer deformation or color fading, while an active lcd with water condensation on its surface will cause corrosion of ito electrodes. (4). glass can be easily chipped or cracked from rough handling, especially at corners and edges. (5). do not drive lcd with dc voltage. 2. liquid crystal display modules 2.1 mechanical considerations lcm are assembled and adjusted with a high degree of precision. avoid excessive shocks and do not make any alterations or modifications. the following should be noted. (1). do not tamper in any way with the tabs on the metal frame. (2). do not modify the pcb by drilling extra holes, changing its outline, moving its components or modifying its pattern. (3). do not touch the elastomer connector, especially insert an backlight panel (for example, el). (4). when mounting a lcm make sure that the pcb is not under any stress such as bending or twisting . elastomer contacts are very delicate and missing pixels could result from slight dislocation of any of the elements. (5). avoid pressing on the metal bezel, otherwise the elastomer connector could be deformed and lose contact, resulting in missing pixels. 2.2. static electricity lcm contains cmos lsi?s and the same precaution for such devices should apply, namely (1). the operator should be grounded whenever he/she comes into contact with the module. never touch any of the conductive parts such as the lsi pads, the copper leads on the pcb and the interface terminals with any parts of the human body. (2). the modules should be kept in antistatic bags or other containers resistant to static for storage. (3). only properly grounded soldering irons should be used. (4). if an electric screwdriver is used, it should be well grounded and shielded from commutator sparks. (5) the normal static prevention measures should be observed for work clothes and working benches; for the latter conductive (rubber) mat is recommended. (6). since dry air is inductive to statics, a relative humidity of 50-60% is recommended. 2.3 soldering (1). solder only to the i/o terminals. (2). use only soldering irons with proper grounding and no leakage. (3). soldering temperature : 280 c 10 c (4). soldering time: 3 to 4 sec. (5). use eutectic solder with resin flux fill. (6). if flux is used, the lcd surface should be covered to avoid flux spatters. flux residue should be removed after wards. 2.4 operation (1). the viewing angle can be adjusted by varying the lcd driving voltage v0. (2). driving voltage should be kept within specified range; excess voltage shortens display life. (3). response time increases with decrease in temperature. (4). display may turn black or dark blue at temperatures above its operational range; this is (however not pressing on the viewing area) may cause the segments to appear ?fractured?. (5). mechanical disturbance during operation (such as pressing on the viewing area) may cause the segments to appear ?fractured?. 2.5 storage if any fluid leaks out of a damaged glass cell, wash off any human part that comes into contact with soap and water. never swallow the fluid. the toxicity is extremely low but caution should be exercised at all the time. 2.6 limited warranty unless otherwise agreed between data image and customer, data image will replace or repair any of its lcd and lcm which is found to be defective electrically and visually when inspected in accordance with data image acceptance standards, for a period on one year from date of shipment. confirmation of such date shall be based on freight documents. the warranty liability of data image is limited to repair and/or replacement on the terms set forth above. data image will not responsible for any subsequent or conse q uential events. hy-line computer components / www.hy-line.de/computer
confidential document FG0700G3DSSWBG01 rev: c page: 18 /19 15. outline drawing b 09/05/08' 7" tft outline dimension fg0700g3s-g01 approved auth revisions description date approve: drawn: check: date: scale title: dwg. no. sheet of 1 1 rev. 1 / 1 data image units m m abcde f 1 2 3 4 5 6 i : 180 ma v : 9.9 v led circuit 11/05/08 hy-line computer components / www.hy-line.de/computer
confidential document FG0700G3DSSWBG01 rev: c page: 19 /19 16. package information carton hy-line computer components / www.hy-line.de/computer

▲Up To Search▲

Price & Availability of FG0700G3DSSWBG01

	To Download FG0700G3DSSWBG01 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .